|
 |
Products / Catalog |
|
|
|
|
|
|
|
|
|
|
|
| Dry Break Couplers |
|
| B.G. Industrial's dry break couplers are the only
quick release ink connectors utilized in the newspaper industry that have
virtually no ink drip after the fittings are disconnected. These quick release
connectors are used in a variety of applications where interchangeability of
different inks and colors are required on a regular basis. Listed are the
unique features of this easy to use connector. |
|
Fittings
Disconnected |
Fittings connected |
|
|
| Features and Benefits: |
|
Durability - High quality manufacturing of
these fitting makes it last longer than comparable connectors.
Easy On/Off
Connection - The spring loaded locking collar located on the female coupler
gives this fitting a snap connection and release characteristic that is unique
to this coupler. This feature eliminates the need to use tools, pinch bars or
hammers to tap fittings that could be difficult to connect or separate. It also
eliminates potential damage to the fittings.
Less Ink Drip - There is virtually
no ink present on the connection faces of both fittings after they have been
disconnected. The flat surfaces of the connection are easy to wipe with a rag.
This characteristic reduces overall ink waste and in-house cleaning.
Easy
Conversion - B.G. Industrial's dry break couplers are easy to retrofit to
existing press equipment and press equipment accessories.
Less Down
Time / Clean Up - The cleanliness of the B.G. dry break couplers minimizes
the amount of in-house cleanup that would normally be required with the older
quick release connectors. Less clean-up also speeds-up servicing of equipment
during maintenance and repair periods. |
|
| Applications: |
|
| Dry break couplers can be
used in a variety of different applications. These range from: |
|
• Pack-Hose
Assemblies / Page Packs
• Portable Ink
Tanks / Ink Canisters
• Ink Levelers for
Open Fountains |
|
| Newspaper Users: |
|
| The following newspapers
are currently utilizing B.G. Industrial, Inc.'s Dry Break
Fittings: |
|
| Austin American Statesman |
Hartford Courant |
| Boston Globe |
Houston Chronicle |
| Colorado Springs Gazette |
Journal News / White Plains NY |
| Commercial Appeal / Memphis |
Lexington Herald-Leader |
| Corpus Christi Caller-Times |
Montgomery Advertiser |
| Denver Post |
New York Post |
| Evening Post & Courier /
Charleston SC |
San Diego Union Tribune |
| Florida Times Union |
Tucson Newspapers |
| Fort Worth Star-Telegram |
Washington Post |
|
|
|
|
|
| Pack-Hose Assemblies |
|
| Available for all type of Ink Injector
Systems |
|
B.G. Industrial's Color Coded Page Pack Hose
Assemblies are available in various colors. This color-coded feature helps
press crews to identify quickly (at a glance) what color ink is utilized with
the hose. All Pack hoses are assembled with B.G. Industrial's Dry Break
Couplers.
Pack hoses are custom built to suit the dimensional
specifications of each customer's press. |
|
|
|
| BGI Pack Hoses Available in Several Colors:
Black, Gray, Blue, Red and Yellow |
|
BGI Dry Break
Female
Part # 9888-38
|
BGI Dry Break
Male
Part # 9888-33
(Unit Sideframe) |
BGI Dry Break
Male
Part # 9888-39
(For Page Pack) |
|
|
| Features and Benefits: |
|
• Colored Push
Lock Hoses - CMYK no hose clamps, pipe fittings required to incorporate
barbs
• Pop-On Connection - no more
beating fittings with a bar to connect Color Coded
Hose
• Faster Press
Make-Ready
• Less Environmental
Issues
• Less Clean-Up - associated with
color position changes
• Reduce Labor Time
by Purging Pack Hoses
• Maximizes the
Efficiency of Your Ink Consumption |
|
| B.G. Industrial's Unique Dry Break Coupler
with Specialized Barb Tee and Elbow - Manufactured Specifically for Pack Hose
Assemblies. |
|
| Specialized Dry Break Couplers with Barb Elbow and Barb Tee
(one-piece) build directly into the fitting enable the hose and couplers to be
connected with no additional fittings. |
|
 |
|
|
|
| Custom Gauges |
|
| Setting the Industry Standard for
Easy-To-Read Gauges |
|
| B.G. Industrial, Inc. is the pioneer of custom gauges that
monitor ink pressure in the system. Gauges are color-coded and correspond to
the particular color of ink present in the ink line. This makes for quick, easy
identification and / or recognition of a certain ink line. |
|
30" Hg / 1-15
psi
Compound Gauge |
0-100
psi
Pressure Gauge |
0-160
psi
Pressure Gauge |
0-300
psi
Pressure Gauge |
|
|
| All gauges come directly form B.G.
Industrial, Inc. trimmed and ready for immediate installation upon
receipt. |
|
| B.G. PRESSURE GAUGE (DRY) |
| 4" dial range 0-100, 0-160, 0-300 or 0-3000 psi, 1/2" LM, DC-200
filled, RG Global T15.1340 diaphragm seal and 316 SS diaphragm, 1/4" flushing
connection with brass "T" handle and bibb, 1/2" instrument and process
connection, 1/2" x 1 3/4" brass hex pipe nipple and Apollo ball valve (#
70-103-07 ) with "T" handle. |
|
AVAILABLE
BG/Magenta, BG/Yellow, BG/Black, BG/Cyan and
BG/Red 0-100
BG/Magenta, BG/Yellow, BG/Black, BG/Cyan and BG/Red
0-160
BG/Magenta, BG/Yellow, BG/Black, BG/Cyan and BG/Red
0-300
BG/Magenta, BG/Yellow, BG/Black, BG/Cyan and BG/Red 0-3000 (High
Pressure) |
|
| B.G. PRESSURE GAUGE (FILLED) |
| 4" dial, with ray 23B snubber, range 0-160, 0-300, or 0-3000 psi,
1/2" LM, DC-200 filled, RG Global T15.1340 diaphragm seal and 316 SS diaphragm,
1/4" flushing connection with brass "T" handle and bibb, 1/2" NTP instrument
and process connection, 1/2" x 1 3/4" brass hex pipe nipple and Apollo ball
valve ( # 70-103-07 ) with "T" handle. Gauges liquid filled. Glycerin is 99.9"
food grade and distilled water is used for blending. |
|
AVAILABLE
BG/Magenta/F, BG/Yellow/F, BG/Black/F,
BG/Cyan/F and BG/Red/F 0-160
BG/Magenta/F, BG/Yellow/F, BG/Black/F,
BG/Cyan/F and BG/Red/F 0-300
BG/Magenta/F, BG/Yellow/F, BG/Black/F,
BG/Cyan/F and BG/Red/F 0-3000 (High Pressure) |
|
| B.G. COMPOUND GAUGE |
| 4" dial, range 30" Hg / 0-15 psi, 1/2" LM, DC-200 filled, RG
Global T15.1340 diaphragm seal and 316 SS diaphragm, 1/4" flushing connection
with brass "T" handle and bibb, 1/2" NTP instrument and process connection,
1/2" x 1 3/4" brass hex pipe nipple and Apollo ball valve ( # 70-103-07 ) with
"T" handle. |
|
AVAILABLE
(BGCG) Magenta, Yellow, Black, Cyan and Red
30" Hg / 0-15 |
|
| All gauges come directly form B.G.
Industrial, Inc. trimmed and ready for immediate installation upon
receipt. |
|
|
|
|
|
| BGI-2002 Low Level Alarm Sensors |
|
| Tote Monitoring Made Easy |
|
| B.G. Industrial, Inc. manufactures a versatile Low-Level Alarm
Sensor panel that monitors the levels of ink tote-bins. Up to four tote bins
can be monitored from one low-level panel simultaneously. Remote sensors are
clipped directly onto the sight glass (the vertical indicator on the side of
the tote) to detect when the metal indicator weight is in close proximity. The
sensors are clipped to the exact (desired) location where the operator wants
the low-level condition to be identified. The sensor sends a signal via a
control wire to the low-level panel where a strobe light and horn are
activated. Each low-level panel has a status display to identify which tote bin
or bins are low. The panels also have reset and acknowledge buttons. This level
indication system minimizes the risk of running an ink pump dry causing damage
to the pump and also limits the possibility of air pockets getting into an the
ink system that can cause problems elsewhere. |
|
| Features: |
|
Gives you
the ability to read the level of multiple tote bins from one location.
Low level alarm
monitoring for up to 4 individual totes.
Sensors are set to the desired low level
position by placing (clipping) the sensing probe directly on the sight
glass.
Probes can easily be disconnected and removed from the tote to
allow for quick replacement of tote.
Easy to operate and inexpensive to
install. |
 |
|
|
|
|
|
| Test Gauge Kit |
|
| Rapid On-Site Testing |
|
|
| Consistent print quality demands that the ink supply pressure be
properly set and controlled. B.G. Industrial's BGC-126 Test Gauge Kit allows
you to spot test your ink pressure without shutting down the ink system-or
creating a leak. The unit uses our quality gauges with a probe similar to that
used to inflate a basketball, thus making it very easy for you to check ink
pressure under static or flow conditions. This is another example of B.G.
Industrial's commitment to helping the newspaper industry by simplifying
procedures and providing high quality components to its customers. |
 |
|
| Application: |
|
Specifically designed for use on vertical tower configurations
that utilize low-pressure ink systems (page packs) B.G. Industrial's Test Gauge
Kit is a quick and easy to use instrument that verifies ink line pressure at
the pack hose connection point. These strategically located test points enable
press maintenance crews to monitor, adjust and balance any fluctuations of ink
pressure, vertically up a 4-High press tower.
Referring to
the picture and diagram below, the test point is a tee fitting located adjacent
to the pack hose connection. On the topside of the tee is a specialized plug
with a removable cap. Inside the plug there is a rubber seal that is actually a
piece of tightly packed rubber that is split down the middle. A probe supplied
with the test kit is screwed on the end of the test gauge. A small amount of
silicone lubricant or Vaseline is applied to the end of the probe and the probe
is inserted into the plug containing the rubber seal. The probe passes through
the split seal to the pressurized side of the seal. Once a reading is taken the
probe should be withdrawn from the plug. The seal closes as the probe is
extracted from the seal. Replacing the plug cap after use is recommended. The
probe should be wiped clean of any ink residue with a clean piece of cloth. The
test gauge is now ready for use at another page pack location. |
|
 |
 |
|
|
|
|
| Portable Ink Tanks |
|
B.G. Industrial, Inc. offers Portable Ink
Tanks in 12, 35, 45 and 65 gallons on
self-contained, easy-to-roll
casters. |
|
| Features and Benefits: |
|
| • |
Carbon/Steel Welded ASME Code Construction |
| • |
Tested to
188 PSI |
| • |
Working
pressure of 125 PSI |
| • |
Pressure
relief valve set at 125 (ASME) |
| • |
3" Valved
(Gate) Fill Port |
| • |
0-200 PSI
Pressure Gauge |
| • |
1/4"
Valved Nipple (ISO Industrial Interchange) Compressed Air
Connection |
| • |
3/4"
Snap-Tite EA Series Coupler (male nipple ink outlet) |
|
- OR
- |
| • |
3/4" B.G.
Dry Break Coupler (male nipple ink outlet) |
| • |
Installed
with a 30 mesh internal filter assembly Easily removed for
maintenance |
| • |
2" NPT
plugged bottom connection for draining and cleanout purposes |
| • |
6" round
x 2" wide Polyolefin castors - 3 total (2 rigid & 1 swivel) |
| • |
1/2"
round steel bar handle for pushing and pulling the tank |
| • |
Externally coated with an industrial enamel (Your choice of
color) |
| • |
Interior
of tank cleaned and oiled, ready for filling with ink |
| • |
The tanks
are color-coded and carry plenty of ink to supply your units without shutting
down to change canisters. |
|
 |
|
|
| These tanks are ready for immediate usage -
NO PREP NECESSARY! |
|
 |
Would You
Rather Be Doing This?... |
Or
This?... |
 |
|
|
| Customer Response: |
|
| "Please accept this letter as a heartfelt, sincere recommendation
of Charlie Greer and B.G. Industrial, Inc. I have found Charlie Greer to be
very knowledgeable and helpful in the purchase and recommendation of our
pressurized ink tank system. I found him to be the consummate professional who
is reliable, respectable and honest. His overall knowledge and understanding in
assessing our operational ink needs made our choice an easy one. It is highly
evident the quality and service are paramount in his company." |
|
THE SUN
Tom Costello
Production
Director |
|
|
|
|
| 5 Gallon Ink Tank Canisters |
|
| B.G. Industrial, Inc. now offers the same
versatile ink canister utilized in many pressrooms. |
|
| Features: |
|
|
| • |
Construction meets latest ASME "UM" Code &
Addenda |
| • |
Wide
mouth oval opening for easy filling |
| • |
Interior
of tank clean ready for immediate filling with ink |
| • |
Canisters
come complete with all required compressed air connection and pressure relief
fittings. |
| • |
3/4"
Snap-Tite EA Series Coupler (male nipple ink outlet) |
|
- OR
- |
| • |
3/4" B.G.
Dry Break Coupler (male nipple ink outlet) |
| • |
Installed
with a 30 mesh internal filter assembly |
|
(Easily
removed for maintenance and cleaning) |
|
|
| Specifications: |
|
|
| • |
Material:
T-304/316L Stainless Steel |
| • |
Finish:
White Pickle - Welds are as Welded |
| • |
Tank
Capacity: 5 Gallons (19.0 Liters) |
| • |
Inside
Diameter 8" (Straight Shell) |
| • |
Maximum
Working Pressure: 140 PSI @ 100°F |
| • |
Hydrostatically Tested to 182 PSI |
| • |
Pressure
relief valve set at 125 PSI (ASME) |
|
 |
|
|
|
 |
 |
 |
| Wide Mouth
Oval Opening On Top Of Canister For Easy Filling |
Canisters Are Available Fitted With 3/4" Snap-Tite EA Series
Coupler Or 3/4" B.G. Dry Break Coupler |
|
|
|
|
|
|
| Pneumatic Ink Pumps |
|
|
|
|
| B.G. Industrial, Inc. is a Dedicated Lincoln
Ink Pump Distributor Providing: |
|
| • |
New
Pumps |
| • |
Specification,
Design & Installation |
| • |
Technical
Service |
| • |
Ink Pump
Maintenance & Service |
| • |
Service
Parts |
| • |
Loaner
Pumps |
| • |
Overnight
Shipping |
|
|
Ink pumps utilized in newspaper plants today are pieces of
equipment that are normally taken for granted. It is not until a pump breaks
down that we suddenly remember just how important this component really is. A
pump that is out of commission, for any period of time, can cost newspapers
huge amounts of money in lost production time and business.
B.G.
Industrial, Inc. is an authorized service center for LINCOLN Pneumatic
Ink Pumps. If you want to purchase a new pump, have a pump repaired/overhauled
or require spare parts, B.G. Industrial can take care of all LINCOLN
pump needs. |
|
|
 |
 |
108 West 3rd.
Street • Deer Park, TX 77536
1-800-460-8393 • (281)479-8393 • fax
(281)479-8827
e-mail sales@bgitex.com |
|
This Web Site Constructed by
Syntropy Properties,
Inc.
© Copyright by BG Industrial - All Rights Reserved
|
